![]() Please call us for advice. Recommended topcoats (above the waterline): Note: Pack size is 4.6 litres or 18.3 litres including hardener. Can be used as primer, mid coat, finish coat or as single coat. Specially designed for areas where optimum surface preparation is not. It is a surface tolerant, micaceous iron oxide. Use the Wintergrade version for application below 10☌ and faster curing times in normal conditions. This is a two component polyamine cured epoxy mastic coating. Technical Data Sheet Jotamastic 80 Surface preparation Substrate Carbon steel Shop primed steel Clean, dry and undamaged shop primer (ISO 12944-4 5.4) Coated surfaces Clean, dry and undamaged compatible coating Clean, dry and undamaged compatible coating Optimum performance, including adhesion, corrosion protection, heat resistance and chemical resistance is achieved with recommended surface. Aluminium flakes within the coatings create an impenetrable barrier to water and increased coating flexibility.įor best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 m² per litre. Dry to re-coat 23C 10 hours Curing time 23C. The aluminium range is particularly suited for submerged areas (look in choose colour for Aluminium or Aluminium red-toned). Buy Jotun Jotamastic 80 marine primer online UK, for sailing boats and yachts with free delivery to the UK. Jotamastic 80 is built on the same technology platform as Jotamastic 87 and is recommended as an anti-corrosive coating for steel above and below water. Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses (from 75 to 200 microns in a single coat). Buy Jotun Jotamastic 80 marine primer online UK, for sailing boats and yachts with free delivery to the UK.
0 Comments
Leave a Reply. |